The stain on the leather upper cannot be wiped with a damp cloth, and cannot be dipped in water, otherwise, it will damage the color paste on the surface of the shoe and make the shoes hard and deform.
For light-colored leather sandals, use a soft cloth dipped in the same color shoe polish. Shoe polish can’t be too thick, because shoe polish has a certain volatility, too much coating, and it will cause the upper to crack after a long time. In addition, it is best to apply a little lard before collection to keep the leather surface soft and moist and not easily deformed.
For smooth leather sandals, use a dry cloth to remove stains and apply some shoe polish.
For suede sandals, use fine sandpaper to gently rub the stains and keep the piles upright before storing.
Hemp rope bottom sandals:
The hemp rope bottom is more likely to be dusty, but it cannot be washed with water, which will affect the appearance. Use a household hair dryer to adjust to the cold windshield, blow off the dust on the bottom of the hemp rope, and then gently brush it with a soft small brush.
Straw bottom sandals:
After wearing it, use a clean rag to soak it in water, wipe off the dust on the woven mat on the bottom of the base, and dry it.
Leather or PU platform sandals:
Apply the corresponding shoe polish to the leather surface during care, gently brush the upper with a soft shoe brush, and then gently rub it back and forth on the leather surface with a clean cloth to make the leather surface brighter and more textured.
Although it is a cloth material, it cannot be washed with water. If there is a slight oil stain, use a small amount of tableware and fruit cleaner to clean it, then use a rag to soak it in water and wash it. This will help. If there are foaming and delamination after washing the cloth, you can use the ironing iron at 80 °C, cover the upper with a white cloth, and align it for 5~10 seconds, basically, recover. Please do not fix it immediately after repairing. Wearing, because the glue curing time in the cloth takes more than 1 hour.
Patent leather sandals:
Wipe the dirt and other stains on the upper with a clean soft cloth. Then use 2 parts of detergent, 1 part of alcohol and 50 parts of water to prepare a cleaning solution. Soak it with cloth and wipe it back and forth on the upper without any force. After the shoes are naturally dried, use a soft cloth soaked in water to wipe the upper of the vamp and place it in a ventilated place to dry naturally.
The first piece of bright swarf is glued on, it feels like sanding paper, and the second one is sequins. No matter which one, if it is wet, it is likely to fall, so you can only use or use a clean small towel, use water. Dampened, dampened with a little bit of silky dirt.
The second style should not be scrubbed with cotton, and the sequins will leave the cotton wool. It is good to wipe it with a polyester cloth. It can be used with water, but not too much.